Non Coated Magnesium Hydroxide for Flame Retardant
| DESCRIPTION | MagShield® UF is a high purity, synthetic grade of magnesium hydroxide,
produced from magnesium-rich brine. |
| USES | MagShield® UF is designed for critical applications such as flame retarded wire and cable insulating compounds.
This material has a typical median particle size under 1 micron. |
| COMPOSITION | Typical | Specification
|
||
| Magnesium Hydroxide, Mg(OH)2 | % | 98.8 | 98.5 min. | |
| Calcium Oxide, CaO | % | 0.60 | 0.70 max. | |
| Silica, SiO2 | % | 0.20 | 0.30 max. | |
| Chloride, Cl– | % | 0.26 | 0.32 max. | |
| Iron Oxide, Fe2O3 | % | 0.13 | 0.18 max. | |
| Sulphate, SO3 | % | 0.01 | 0.05 max. | |
| Aluminium Oxide, Al2O3 | % | 0.07 | 0.10 max. | |
| Loss on Ignition | % | 30.9 | 30.0 min. |
| PHYSICAL PROPERTIES | Typical | Specification
|
|
| Bulk Density, loose, g/l | 400 | ||
| Surface Area, m2/g | 13 | 8 – 21 | |
| Median Particle Size, microns | 1 | 0.9 – 1.4 |
| PACKAGING | Available in 25 kg bags on pallets, in big bags or bulk, when required. |
| STORAGE | Store the material in a dry, clean and ambient temperate place.
Reseal opened bags. |
| MagShield® is a trademark of Martin Marietta Magnesia Specialties, LLC |
| This product is produced by Martin Marietta Magnesia Specialties, LLC and distributed in Poland by “GrayWolf” W.Szwaja in cooperation with M.A.F. Magnesite B.V. |
Notice: The information contained herein is, to the best of our supplier’s knowledge and belief, accurate. Any recommendations or suggestions made are without warranty or guarantee of results since conditions of handling and of use are beyond our control; we therefore, assume no liability for loss or damage incurred by following these suggestions. Seller warrants only that this product will meet the specifications set forth. Any other representation or warranty, either express or implied, is specifically disclaimed including warranties of fitness for a particular purpose and of merchantability. Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for user’s intended application and user assumes all risk and liability whatsoever in connection therewith. Neither seller nor manufacturer shall be liable in tort, contract or under any theory for any loss or damage, incidental or consequential, arising out of the use of or the inability to use the product.